Unexpected Ultrasound

 

Imagine a survey that asks American consumers to name three or more products that use ultrasound. Many would have trouble naming more than one. Medical imaging machines may be the most common answer. That’s not surprising, given that ultrasonic devices are largely hidden outside of a healthcare setting.  Lately, however, ultrasound technology is emerging in many more places. These places are unexpected, in the middle of our personal therapies for wellness, our recreational equipment, and even in our mobile devices. Some are literally at our fingertips.  In this post, Mesoteryx reveals four unexpected ultrasound applications.

Aromatherapy Diffuser

AromaWeb defines Aromatherapy as the use of volatile plant oils, including essential oils, for psychological and physical well-being (AromaWeb, n.d.). Evidence of medicinal use of botanic and essential oils is found in many cultures, from ancient China to Egypt. Since antiquity, each developed unique methods for delivering oils to the body, including topical treatments and inhalants. Aromatherapy centers on inhalants comprised of oil suspended in water vapor. A class of products known as aromatherapy diffusers (also referred to as vaporizers, atomizers, and humidifiers) create vapor in a variety of ways. Many diffusers evaporate the oil/water suspension from a reservoir with the heat of a candle, or by drawing the suspension through a wick. An ultrasonic aromatherapy diffuser vaporizes oil with high frequency sound waves. An example is pictured below.   


Figure 1: Holmes Ultrasonic Whale Humidifier, HUL2622W-UM (Source: Holmes, CC0, via Wikimedia Commons)


An ultrasonic diffuser consists of three fundamental components: the base, the reservoir that holds the liquid suspension, and the cover. The reservoir sits atop the base. A hole at the center of the reservoir exposes the face of an ultrasonic transducer. These transducers are thin discs, 10 - 20 mm in diameter. They’re constructed from a ceramic that exhibits the Inverse Piezoelectric Effect (Deosaran, n.d.).  Apply a potential between the disc surfaces and it will cause strain and deflect in one direction or another, depending on the polarity of the potential (Rajiv, 2022). Conversely, if the disc is strained, an electric potential will arise. Electrically, the disc looks like a parallel plate capacitor. Imagine the disc attached to a printed circuit board with a power supply, and one or more inductors. This forms a so-called LC, or “tank” circuit. The tank circuit applies a resonant, oscillating potential to the disc that causes it to vibrate at tens to hundreds of thousands of cycles per second, thereby making ultrasound. Ultrasonic waves do not boil the oil/water suspension in the reservoir.  On the contrary, the high-frequency sound waves mechanically agitate the suspension, breaking it into microscopic droplets that form a mist. A fan in the base pushes the mist out a port in the cover (see figure above) (Diffusero, 2023).

A challenge for designers of ultrasonic appliances like this one is the relatively high potential necessary to drive the ultrasonic transducer. The transducer in Hareendran’s ultrasonic diffuser drive circuit operates at 26 volts (Hareendran, 2019). This leads to greater energy demand. See the appendix at the end of this post for more explanation. 

SAW RF Filter

Since the late 19th century, we’ve relied on wireless radio frequency (RF) communications to move information at the speed of light.  A myriad of communications products, from mobile phones to digital televisions, incorporate RF filters (Rajiv, 2022). Filters are essential for rejecting unwanted signals and admitting primary signals for processing. In recent decades, compact and efficient filters based on high-frequency sound waves have performed this critical function in products that operate at frequencies up to 2 GHz (ApiTech, 2018). A Surface Acoustic Wave (SAW) RF filter is pictured below.


Figure 2: 1990s-Vintage SAW Filter Manufactured by Toshiba (Source: Mister rf, CC BY-SA 4.0 <https://creativecommons.org/licenses/by-sa/4.0>, via Wikimedia Commons)


The global market for SAW filters was $5.5 billion last year, with a projected cumulative aggregate growth rate of 8.1% over the seven-year period beginning in 2023 (Research and Markets, 2024).

Manufacturing a SAW filter begins with a crystalline substrate that exhibits the Inverse Piezoelectric Effect described above. Lithium niobate and similar materials are preferred (ApiTech, 2018). Common semiconductor manufacturing steps are used to evaporate metal traces onto the substrate in the micrometer-sized comb pattern shown in the figure above. A pair of comb patterns are on opposite ends of the substrate. The dimensions of each pattern control how the filter operates. Input a radio frequency signal to the comb on one side and the substrate reacts. The substrate strains and sound waves move through the bulk of the substrate to the opposite end. When the wave encounters the opposing comb pattern, it induces a similar RF signal, only this signal is free of the energy at unwanted frequencies.    

Ultrasonic Anemometer

Below is an animation of a cup anemometer, an instrument for measuring wind speed. They are scattered throughout the United States along highways, attached to radio towers, mounted to buoys in littoral waters, wherever there is an automated weather observation station. It’s simple and reliable for

Figure 3: Cup Anemometer (Source: Public domain, via Wikimedia Commons)


measuring wind speed.  Many are mounted to weathervanes to sense wind direction. Since their inception in the 1970s, ultrasonic anemometers have proven their value in measuring wind speed, direction, temperature, and more (Nfaoui, 2012). An ultrasonic anemometer is pictured below. It has no moving parts. On the sensor deck, two ultrasonic emitters are paired with a set of receivers.

Figure 4: FT742-DM50 Ultrasonic Anemometer with Turbulators (Source: Heathermargot, CC BY-SA 4.0 <https://creativecommons.org/licenses/by-sa/4.0>, via Wikimedia Commons)

Figure 5: Gill Instruments Windsonic Sensor (Source: Kallap85, CC BY-SA 4.0 <https://creativecommons.org/licenses/by-sa/4.0>, via Wikimedia Commons)

An airstream passing across the deck changes the speed of the ultrasonic waves relative to the speed of sound in static air and standard atmospheric conditions (Nicholson, 2015). This results in wind speed. Measuring changes in the speed of sound in actual wind conditions also provides air density and temperature information (Sherman, 2013). Differences in measurements at each receiver yields wind direction. Characterizing variations in the speed of sound at many points in a short time (approximately 20 times per second) paints a picture of atmospheric turbulence, which is useful for aviation (Nfaoui, 2012).    

Manufacturers list performance specifications online for commercial ultrasonic anemometers.  For example, the Renke Model RS-CFSFX can resolve wind speed in 0.01 m/s increments for winds as fast as 60 m/s, with ±0.2 m/s accuracy (Shandong Renke Control Technology Co.,Ltd., 2024).  Wind direction is accurate to 1 degree with resolution of ±3 degrees.

Ultrasonic Fingerprint Scanner

Consumer electronics manufacturers are harnessing ultrasound to enhance the smartphone user experience. One enhancement is in smartphone security that was first introduced in 2016 (Triggs, 2024). Certain smartphones, including Samsung Galaxy S24 models, feature a fingerprint scanner that builds a highly unique (and therefore, more secure) three-dimensional map of ridges and troughs in the skin with ultrasound. The S24 scanner is the QFS4008, made by Qualcomm (Schoon, 2024). Scanning employs an ultrasonic emitter, similar to the ultrasonic anemometer above. In this case, however, the emitter and receiver occupy a volume that is 64 square millimeters and150 micrometers thick, and is housed behind the glass display, as the figure below indicates (Triggs, 2024). Strictly speaking, ultrasound is a pressure wave that propagates at high frequencies in the air. 

Figure 6: Qualcomm Smartphone Ultrasonic Fingerprint Scanner (Source: Jason England, CC BY-SA 4.0 <https://creativecommons.org/licenses/by-sa/4.0>, via Wikimedia Commons)

Some ultrasonic waves will reflect from the fingertip to the receiver while other waves will be absorbed and attenuated by the skin (Triggs, 2024).  In addition to greater security of the detailed fingerprint image, another more practical benefit of the technology is that it works with a wet finger. 

Appendix

Consider the ultrasonic transducer driven by a tank circuit with time-varying potential V(t) and frequency ω:

(1)

where V0 is the applied potential in volts. Charge stored in the capacitor is the product of the time-varying potential and the transducer’s capacitance:

(2)

where C is the capacitance in Farads.  The work W performed in “filling” the capacitor over interval dt is:

(3)

Substituting (1) and (2) into (3) and integrating yields the total energy dissipated in filling the capacitor (in other words, operating the transducer) over a single period of oscillation:

(4)

the integral yields the following expression:

(5)

where φ is a constant phase shift. Evaluating U(t) over the period -π to π leads to the following:

(6)

As this result shows, over this period of oscillation, the energy dissipation is a function of the square of the amplitude of the applied potential.  The energy demand of the ultrasonic transducer becomes high as the applied voltage increases (Keim, 2018) (BJYU's The Learning App, 2024).  Let’s say for simplicity, the transducer capacitance is 1 F.  It follows that the energy required to drive it at 26 V is approximately 2.1 kJ. Compare this with the same capacitor storing energy at 5 Vdc or 78J.

References

ApiTech. (2018). Introduction to SAW Filter Theory & Design Techniques. Retrieved from spectrumcontrol.com: https://www.spectrumcontrol.com/globalassets/documents/rf2m-us/white-paper---saw-filter-2018.pdf

AromaWeb. (n.d.). History of Aromatherapy. Retrieved from AromaWeb: https://www.aromaweb.com/articles/aromatherapy-history.php

BJYU's The Learning App. (2024). Energy Stored in a Capacitor. Retrieved from BYJU'S: https://byjus.com/physics/energy-stored-in-a-capacitor/

Deosaran, A. (n.d.). Technical Description of an Ultrasonic Essential Oil Diffuser. Retrieved from Andre Deosaran’s Academic Portfolio: https://andreportfolio.commons.gc.cuny.edu/technical-description-of-an-ultrasonic-essential-oil-diffuser/

Diffusero. (2023, April 27). What is an Ultrasonic Aroma Diffuser and How Does It Work? Retrieved from Diffusero: https://essentialoildiffusero.com/resources/ultrasonic-diffuser/

Electricity-Magnetism.org. (2024). Ultrasonic Proximity Sensor. Retrieved from www.electricity-magnetism.org: https://www.electricity-magnetism.org/ultrasonic-proximity-sensor/

Hareendran, T. (2019, 6 18). Ultrasonic Mist Maker (DIY). Retrieved from Electro Schematics: https://www.electroschematics.com/ultrasonic-mist-maker/

Keim, R. (2018, 10 15). Understanding and Modeling Piezoelectric Sensors. Retrieved from All About Circuits: https://www.allaboutcircuits.com/technical-articles/understanding-and-modeling-piezoelectric-sensors/

Nfaoui, H. (2012). Sonic Anemometer. In A. Sayigh (Ed.), Comprehensive Renewable Energy. Elsevier. Retrieved from https://www.sciencedirect.com/topics/earth-and-planetary-sciences/sonic-anemometer#:~:text=It%20uses%20ultrasonic%20sound%20waves%20to,by%20the%20effect%20of%20the%20wind.&text=It%20uses%20ultrasonic%20sound,effect%20of%20the%20wind.&text=ultrasonic%20sou

Nicholson, D. (2015, February 18). How Do Ultrasonic Wind Sensors Work? Retrieved from Practical Sailor: https://www.practical-sailor.com/marine-electronics/how-do-ultrasonic-wind-sensors-work

Rajiv. (2022, July 30). What is SAW Filter? Working and Applications. Retrieved from RF Page: https://www.rfpage.com/what-is-saw-filter-working-and-applications/

Research and Markets. (2024, June). Surface Acoustic Wave (SAW) Filters - Global Strategic Business Report. Retrieved from Research and Markets: https://www.researchandmarkets.com/reports/5301621/surface-acoustic-wave-saw-filters-global

Schoon, B. (2024, February 5). Samsung Galaxy S24 Ultra has a slightly newer fingerprint sensor. Retrieved from 9to5Google: https://9to5google.com/2024/02/05/samsung-galaxy-s24-ultra-fingerprint-sensor/#:~:text=In%20the%20Galaxy%20S24%20Ultra,Qualcomm%20first%20launched%20in%202021.

Shandong Renke Control Technology Co.,Ltd. (2024). Ultrasonic Wind Speed Direction Sensor. Retrieved from Renke: https://www.renkeer.com/product/ultrasonic-wind-speed-direction-sensor/

Sherman, D. e. (2013). Sonic Anemometers. In J. Shroder (Ed.), Treatise on Geomorphology. Academic Press. doi:978-0-08-088522-3

Triggs, R. (2024, March 11). How fingerprint scanners work: Optical, capacitive, and ultrasonic explained. Retrieved from Android Authority: https://www.androidauthority.com/how-fingerprint-scanners-work-670934/ 

Comments

Popular posts from this blog

Ingenuity is Timeless

Cooking in 2050: A Journey Through Futuristic Culinary Tech

Disruption in Data Center Design Part III: The Disruptor