Ingenuity is Timeless
Ingenuity is Timeless
In October of 2021, I found myself on another trip to visit my mother in the hospital. At 79, her stays are becoming longer and more frequent. One morning before visiting hours, I took the opportunity to put a dent in the attic of the home where I was raised. Nothing had been removed from that attic since the day my family arrived in 1969. By the time I dug in, it looked more like a warehouse than an attic. In a wooden trunk between stacks of dusty boxes is where I found it.
![]() |
| Bell & Howell Model 265 projector, manufactured in April 1965 |
A Bell & Howell Model 256 movie projector, in the original box, unopened and undisturbed for over fifty years. I knew that heirlooms like my old baseball card collection were up there, but this was an enigma. Although millions of American families owned movie projectors after World War II, ours had never made home movies. My parents never mentioned its existence. The attic was not a benign environment for an engineered product such as this. It had endured five decades of seasonal temperature extremes from the frigid New England winters and the oppressive, humid summers. Even with this punishment, the motor and lamp came to life with a flick of the sturdy switch. Extreme resilience in a modestly priced product that’s designed for a brief life is a hallmark of ingenuity. Dictionary.com defines ingenuity as “the quality of being cleverly inventive or resourceful.” I’ll present a few of the resources that are cleverly arranged in the Model 256 that endures.
I bought a 60-year-old Kodachrome 8-mm home movie from eBay and loaded it. Initially, the sprockets that load and advance the film would not move. After removing the rear cover, I found a drive belt that was worn and slipping. After replacing it with a neoprene O-ring of similar size from a water filter, the sprockets turned anew, and the film played a grainy movie of scenes of a stranger’s family life from a by-gone era. But the story doesn’t end here. In fact, this isn’t a story about restoring an old projector. No. It’s a tale of technology in the middle of a machine that is recognized by many, and the ingenuity that I found when I removed the cover and discovered its secrets.
The projector advances a sequence of photographs on a reel of film past an aperture that is illuminated by a high-intensity white light source. A lens assembly projects an image on a wall or a screen. The projector advances the film at a rate fast enough (for the Model 256, 16 frames per second) such that the sequence of images presents a moving picture to the eye. A rotating shutter reduces flickering between frames. Here’s how the Model 256 implements the concept.
At the heart of the projector is a shaded pole AC induction motor. A 19th-century breakthrough, this compact motor operates like a transformer but uses copper bars to bias the magnetic field in the laminated steel frame, causing it to rotate and drive the rotor. A stamp on the motor frame confirms the date of manufacture: April 1965.
![]() |
| In the foreground is the "claw" mechanism that advances he film |
![]() |
| Wheels and gears mounted to rocker arms drive the film mechanism forward and backward In the foreground (bottom) is the shaded pole induction motor |
The motor drives cooling fans and the projector mechanism. At the center of the mechanism is a flanged disk. Slots on the face of the disk comprise the shutter. A rocker arm that is toggled by a lever engages opposing drive wheels on the outer and inner surfaces of the flange, thereby driving the disk clockwise or counterclockwise. A worm gear attached to the disk transfers torque to a train of nylon gears that turn the film reels and the feed sprockets. A gear attached to another rocker transfers torque to the rear reel or the front reel, depending on the position of the lever. A cam is attached to the face of the shutter disk. The cam causes an arm to oscillate at a rate that is synchronized with the film feed mechanism. Known as the claw, the arm uses raised tines at one end to engage holes in the film and advance it frame-by-frame1. Creating an affordable mechanism that handles film that is as stiff as a wet noodle; advancing it at the correct frame rate all while keeping it flat and undamaged – demands ingenuity.

Instructions showing the Optical Field Flattener feature
So, what was learned from this brief under-the-hood tour of an antique? It’s tempting to examine the Model 265 and conclude that, “They don’t make them like they used to,” and that would be correct. They don’t. If manufactured today, the Model 256 would have no commercial market beyond collectors and enthusiasts. More important is that after unboxing this treasure and tinkering with it, I found ingenuity. Ingenuity is found in one form or another in the iconic products of yesteryear and in those of our generation, from the iPhone to messenger RNA vaccines. It is the performance requirements that change with time and ingenuity is vital to achieving them. In this sense, ingenuity is timeless. Don Bell and Bert Howell used it to propel the motion picture industry forward beginning in 1907. A remarkable history of Bell and Howell is available from the Made in Chicago Museum at https://www.madeinchicagomuseum.com/single-post/bell-and-howell/.
1Tyson, J. “How Movie Projectors Work,” https://entertainment.howstuffworks.com/movie-projector.htm
2Hecht, E., Optics, 4th ed. New York: Addison-Wesley, 2002.
3Minoia, A. “What Does a Field Flattener Do?” https://nightskypix.com/what-does-a-field-flattener-do/#:~:text=A%20field%20flattener%20is%20an%20optical%20element%20that,is%20better%2C%20but%20sometimes%20more%20glass%20is%20necessary
4Shaw, W.C., “Field Flattener Lens Element Assembly,” U.S. Patent 4,365,877, 1982.




Comments
Post a Comment