Cooking in 2050: A Journey Through Futuristic Culinary Tech

 As I write this post, another holiday season is in full swing. It will be capped by family and community gatherings with great food that makes them memorable. There is, of course, a great deal of preparation involved in creating lavish holiday meals. Expert chefs and family cooks who are charged with pulling the meal together draw on experience with the basic techniques of food preparation that are old as humanity itself. They also get help from essential kitchen appliances.  Between the farm and the fork, the next quarter century will see transformative change in the tools we use to cook. The following is a glimpse of cooking in 2050.

To begin, it is helpful to ask some fundamental questions: why do we cook, when did we start cooking, and why is it necessary? Humans have larger brains than their primate ancestors. Larger brains need far more calories to function. In addition, modern human teeth and digestive systems are smaller. This makes it difficult to get enough nutrients fast enough without pre-processing our food. Pre-processing by techniques such as roasting, smoking, salting, and drying makes food safer, longer lasting, more palatable, and easier to digest. We therefore spend less time gathering, eating, and digesting food.  (Lawton, 2016).  Ancient humans practiced all of these. 

Roasting meat, fish, and vegetables over an open flame in a crude fire pit may be the earliest technology for cooking. Direct evidence of this was recently discovered at an archeological site called Gesher Benot Ya’aqov, in Israel’s northern Jordan valley. (Deutsche Welle, 2022).  Crystallogaphic analysis of 780,000-year-old fish teeth uncovered near fire pits at the site revealed that they had been roasted at temperatures approaching 500 C. From roasting fish at Gesher Benot Ya’aqov, this Homo Erectus tribe and others like it across the ancient world developed new and more efficient cooking tools. They would pre-heat stones in the fire pit and add them to receptacles containing raw ingredients that were dry or submerged in water. Receptacles began as rocks with concave depressions or large shells. They were replaced by clay pottery.  As civilizations arose from organized settlements, fire pits gave way to familiar stone and brick hearths, and free-standing earthen ovens, such as the iconic horno used by native tribes of the American Southwest (Wikipedia).

In modern times, people cook with various appliances to take advantage of unique properties that different physics and mechanisms of heat transfer have to offer. A conventional electric or gas range cooks by conducting heat from a gas flame or electrified conductor to a metal pot or pan that heats the food within. This is effective for searing and frying. Electric ovens bake items by combining circulating warm air (convection) with thermal radiation from a glowing electrical conductor (broiling). Each appliance creates the high surface temperature and dry environment necessary to evaporate moisture and cause browning. This makes items like pizza crusts crispy, and steaks seared to complex, flavorful perfection. The scientific term for browning is the Maillard reaction between proteins and simple sugars in the outer layers of the food surface (Schulze, 2023). By contrast, microwave ovens cook with radio waves at a frequency corresponding to the resonance of water molecules within the raw food. Although highly effective for heating a slice of pizza quickly, most people know by the soggy outcome that the microwave is not where the Maillard reaction takes place. Others seek the richness of browning with the heating efficiency of a microwave oven. For this purpose, there is electromagnetic induction.

The electromagnetic induction range was initially patented at the turn of the 20th century and appeared at the 1933 World’s Fair (Gold, 2021). Only in recent decades have affordable induction cooktops like the one pictured below been available to the residential mass market.  Underlying the glass-dielectric


Figure 1: An induction cooktop boils water without heating underlying layers of newsprint (Source: Wtshymanski, Wikimedia Commons, licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license CC BY-SA 3.0 Deed | Attribution-ShareAlike 3.0 Unported | Creative Commons)

surface of the cooktop is a copper coil. When alternating current at frequency 25-50 kHz passes through it, a time-varying magnetic field is created, according to the Ampère-Maxwell principle. The key to harnessing the field
is the pan or pot. If it contains a thin layer of a metal that is easily magnetized (typically an iron alloy), then it can induce electrical eddy currents. The combination of the coil and the pot can be thought of as an electrical transformer (Wikipedia). The coil has a greater number of turns than the pot, which comprises a single turn or a short circuit. This transformer steps down the voltage in the pot while stepping up the current. High current passing through the thin conductor produces heat.  Furthermore, it is possible to heat more than the bottom face of the pot if the metal layer is present on all surfaces.

Users tout the principal feature of induction cooktops: they heat up much more rapidly than a conventional range. To prove this, we will consider the simple model below and do some easy math. Imagine a three-dimensional control volume in the bottom of the pan as shown. If we track the change


Figure 2: Control volume in the bottom of a pan on an induction cooktop

in the balance of energy within the control volume during cooking, we can learn something about the change in temperature over time (DeWitt, 1990). Since energy is conserved in the system, the sum of energy entering the control volume, leaving the control volume, and generated within the control volume, is equal to the change in stored energy in the control volume with time.  In mathematical form, it looks like this:                                                                                                                                                                                                          

Here, the subscripts G and st refer to energy generated and stored within the control volume, respectively. The dot above each variable indicates a rate of change in the quantity of energy.  Changes in stored energy relate to temperature by the following expression:

                                                                                   
 (2)

where ρ is the density of the control volume material, W, L, and t is its width, length, and thickness, respectively, and cp is the specific heat capacity of the control volume material. Lastly, dTs/dt represents the change in control volume surface temperature Ts with time. For simplicity, imagine that the control volume is perfectly insulated such that energy going out is zero. Now, in the case of cooking on a conventional range, the only non-zero quantity on the left side of (1) is energy going into the control volume. The range is conducting energy from the heating element to the control volume.  Fourier’s law for conduction rate applies:                                                                              

(3)

where k is the coefficient of thermal conductivity. Substituting (2) and (3) into (1) and solving for dTs/dt yields the following:                                                  

(4)

In electromagnetic induction cooking, the eddy currents generate energy within the control volume:

                                                                                  
             (5)

where I is the electrical current in amperes and φ is the control volume metal resistivity in units of ohm-meters. Substituting (5) and (2) in to (1) in similar fashion results in the following:

                                                                                 
(6)

Inspecting equation (4) reveals that the surface temperature of the control volume will increase linearly with time, proportional to the coefficient of thermal conductivity. In (6), the surface temperature grows over time as the square of the induced current. All things being equal, this exponential growth means that the pot will heat up faster using an electromagnetic induction cooktop. Some of the reasons for the transition to electromagnetic induction cooking are not related to flavor or efficiency.  In the state of California, the switch is motivated by sustainability. The state plans to phase out residential natural gas utilities by 2045 (Gold, 2021). Induction cooktops may fill the void left by the resulting drawdown in natural gas-fired ranges. Lastly, there is safety. Unlike a conventional range, induction cooktops do not produce a flame, nor do they become hot to the touch when not in contact with a suitable pot or pan. Beyond efficiency and sustainability, the year 2050 may be marked by software-driven culinary technology that personalizes nutrition.

To better visualize cooking with the culinary technology of 2050, first picture the present day: thousands of receptacles filled with sweet dark batter move along a conveyer belt in a processing facility. They’re about to be baked in an oven with a software-controlled temperature profile.  When they emerge from the oven, a robot will apply a layer of pasty frosting to each cake. It will then mate it with the upper half, baked on a parallel line. After another layer of frosting on the outer sides, the layer cakes are boxed and sealed on their way to the frozen food aisle of your local superstore. This is an example of robotics, automation, and software in food production.  It relies on standardization to manufacture the product on an industrial scale. In 2050, the picture changes. The scene is a residential home kitchen. Robotic equipment executes the mundane task of mixing the ingredients. These robotics have their roots in the previous example, but there is little standardization. They adapt. In fact, on this day, the ingredients are unique. A mobile app with knowledge of the resident’s individual nutrition plan communicates via the Internet of Things to the refrigerator and pantry to identify ingredients with appropriate nutrients. It customizes a fitting layer cake recipe. But on closer examination, these ingredients appear to be vastly different than what was used in the past.  In place of white flower is a batter made from the starchy stem of the Enset or “false banana” (Briggs, 2022). It’s native to East Africa, thrives in warming climates, and is now feeding millions world-wide. Before baking, the Enset batter is mixed and loaded in an apparatus with other ingredients, in paste and powder form. It’s hard to imagine how this arrangement will result in anything other than an unpalatable mush.  Enter 3D Food Printing. 

3D Food Printing is an offshoot of Additive Manufacturing. An early commercial application was a chocolate printer launched in 2012 (Blutinger, 2023). Guided by software, this technology uses a laser to sinter together layers of paste ingredients. Some layers act as fillers, like the middle layer of frosting in the example above. Other more viscous ingredients serve as structural layers. With many adjustable beam parameters, the laser can adapt to sinter the distinctive layers. The Blutinger group recently demonstrated this by successfully printing a seven-layer dessert. Adopting 3D Food Printing in the larger market is contingent upon reducing the cost of the appliance while enforcing consumer laser safety.

What was most surprising to the author in researching this post is the breadth of innovation associated with the future of food preparation. This post focuses chiefly on culinary technology in appliances. However, there is a wealth of new knowledge in areas such as Lab-Grown Meats, Indoor Vertical Farming, Artificial Intelligence in Nutrition, and much more. As this holiday season draws to a close, enjoy that family feast knowing that 2050 holds the potential for innovation to enhance our dining experiences and make cooking more convenient, efficient, and enjoyable.

References

Blutinger, J. C. (2023). The future of software-controlled cooking. NPJ Sci Food, 7(6). Retrieved from https://doi.org/10.1038/s41538-023-00182-6

Briggs, H. (2022, May 21). Future foods: What you could be eating by 2050. Retrieved from BBC: https://www.bbc.com/news/science-environment-61505548

Deutsche Welle. (2022, November 21). Evidence of cooking 780,000 years ago rewrites human history. Retrieved from Frontline, The Hindu: https://frontline.thehindu.com/science-and-technology/anthropology-evidence-of-cooking-780000-years-ago-rewrites-human-history/article66164290.ece

DeWitt, F. I. (1990). Fundamentals of Heat and Mass Transfer, 3rd ed. New York: John Wiley & Sons.

Encyclopedia Britannica. (2023, November 21). Resistivity. Retrieved from Britannica: https://www.britannica.com/science/resistivity

Gold, J. (2021, June 30). Here’s Why Trend-Setting Induction Technology Is Worth Considering for Your Home. Retrieved from Forbes: https://www.forbes.com/sites/jamiegold/2021/06/30/heres-why-trend-setting-induction-technology-is-worth-considering-for-your-home/?sh=58634c6d6753

Lawton, G. (2016, November 2). Every human culture includes cooking – this is how it began. Retrieved from New Scientist: https://www.newscientist.com/article/mg23230980-600-every-human-culture-includes-cooking-this-is-how-it-began/

Schulze, E. (2023, May 13). An Introduction to the Maillard Reaction: The Science of Browning, Aroma, and Flavor. Retrieved from Serious Eats: https://www.seriouseats.com/what-is-maillard-reaction-cooking-science

Wikipedia. (n.d.). Horno. Retrieved from Wikipedia: https://en.wikipedia.org/wiki/Horno

Wikipedia. (n.d.). Induction Cooking. Retrieved from Wikipedia: https://en.wikipedia.org/wiki/Induction_cooking

Comments

Popular posts from this blog

Ingenuity is Timeless

Disruption in Data Center Design Part III: The Disruptor